![]() ![]() Stretch it upward to drain all the water before storing. The ProHeat 2X Revolution has a 1 gallon clean water tank. Add 2 ounces of any BISSELL Boost per 1 gallon of water. Suction clean water from a bowl with the hose to clean it. Pour in more power with BISSELL Boosts Fill tank with water and 2X formula (Step 3 above). Remove and rinse the tool after you are finished cleaning. Release the trigger and move the tool back and forth to suction the dirty water. ![]() The sliding crevice tool cleans when moving forward and suctions when pulled backward. Move the tool back and forth while squeezing the trigger. Spray formula onto the area by pressing the trigger. Lock a cleaning tool into the end of the hose. Turn the ReadyTools dial to the "TOOLS" position and unwrap the hose from the unit. Using the Select Model's Upholstery Tools When you are finished, rinse out the tank in hot water. Refill the bladder with measured formula and hot water, if you want to continue cleaning. Remove the lint screen from the tank lid, rinse and place it back in the lid. ![]() Empty the dirty water and rinse the tank. Remove the tank from the machine and remove the lid from the tank. Suction the area until you no longer see water coming into the tank. Suction the same area dry by releasing the trigger and slowly moving the machine forward and backward.Ĭontinue working over the same area until the formula being pulled into the machine appears to be clean. Slowly pull the machine backward while still squeezing the spray trigger. Unlock the handle by pressing the handle release with your left foot.Ĭlean an area by slowly pushing the machine forward while pressing the spray trigger, which is in the handle. The "Select" model's power switch is a red foot pedal on the back of the unit. The power switch is on the back of the unit. Plug the power cord into a grounded outlet and turn the power switch to the "on" position. This step is not necessary for the "Select" models. Pull the machine's main handle back up until it is locked in place. Pull the tank handle down to lock in place. Place the tank back into the back of the machine. Replace the tank's lid and lock it in place by pulling the handle back to the upright position. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |